JA-KNX Jablotron KNX Schnittstelle

ELAUSYS JA-KNX ist ein KNX Gateway für die Alarmsysteme Jablotron 100. Er ermöglicht die bidirektionale Kommunikation mit dem Alarmsystem über das Kommunikationsmodul RS-485 (JA-121T) von Jablotron.

  • JA-KNX-small
  • SERIAL-pcb-medium
  • SERIAL-medium-BG
  • KNX Schnittstellen für Jablotron 100 Alarmsysteme
  • Bis zu 32 bidirektionale Ein- / Ausgänge (PG) 
  • Bis zu 96 Zonen Status
  • Steuern Sie bis zu 4 Bereiche (Arm / Teil / Unscharf)
  • 9 Status pro Bereich (Eindringen, Eindringen, Verlassen, Feuer, …)
  • Abrufen von KNX Szenen für jeden Status
  • Eingebauter Abschlusswiderstand für RS485
  • Kommunikationsfehlerüberwachung
  • Optionales Hutschienengehäuse (nur für Version V3)

BESCHREIBUNG

Das KNX Schnittstellenmodul JA-KNX ist ein KNX Gateway für die Alarmsysteme Jablotron 100. Er ermöglicht die bidirektionale Kommunikation mit dem Alarmsystem über das Kommunikationsmodul RS-485 (JA-121T) von Jablotron.

 Integratoren profitieren von einem voll integrierten Alarmsystem mit KNX Szenarien, automatischer Beleuchtung mit den Bewegungsmeldern, Scharfschaltung oder Überwachung des Systems über eine KNX Visualisierung.

 Diese Schnittstelle ist für die Verwendung mit einem Alarmsystem der JABLOTRON 100-Serie vorgesehen. Das System muss mit einem JA121T-Modul für RS485-Kommunikation ausgestattet sein.

  • JA-KNX Jablotron Overview
  • JA-KNX V2 Jablotron Connection

VERBINDUNG

 Der RS485-Busleitung muss zwischen dem JA121T und der JA-KNX Schnittstelle mit den blauen Schraubklemmen an beiden Modulen verbunden werden. Der Abschlusswiderstand ist bereits auf dem KNX Schnittstellenmodul integriert, daher ist keine zusätzliche Komponente oder Verdrahtung erforderlich.

  • JA-KNX Connection
  • JA-KNX V3 Jablotron JA121T wiring

SOFTWARE

Konfiguration von 16 oder 32 PG ist verfügbar und wird in den Gerätegruppenobjekten aufgelistet.

Jedes PG des Jablotron Alarmsystems kann von einem Gruppenobjekt gesteuert werden und sein Status wird abgerufen.

GO NAME DESCRIPTION
1 PGx PG Control from KNX
2 PGx Status PG status

Die Konfiguration von bis zu 96 Zonen ist verfügbar und wird in den Gerätegruppenobjekten aufgelistet.

Standardmäßig ist der Zonenstatus für die Zonen 1 bis 96 des Alarmsystems konfiguriert. Ein allgemeiner Parameter erlaubt die Änderung von Zone 97 auf 192 . Dann haben Sie die Möglichkeit, zwei Gateways in der gleichen Installation zu verwenden, um 192 Zonen des Alarmsystems abzudecken.

Jede ZONE hat 1 Gruppenobjekte (GO) für den Status zu KNX.

GO NAME DESCRIPTION
1 Zone x Status Zone status

Jeder Bereich kann mit den 3 Gruppenobjekten gesteuert werden: Arm, Arm teilweise oder Unscharf. Mehrere Status sind verfügbar und haben ein dediziertes Gruppenobjekt. In den Gruppenobjekten sind bis zu 4 Bereiche aufgelistet.

Jedem Status kann eine Szene zugewiesen werden. Diese Szenenummern werden jedes Mal aufgerufen, wenn der Zonenstatus aktiv ist (AN).

Jeder Bereich hat 12 Gruppenobjekte (GO), 3 für die Steuerung und 9 für den Status auf KNX.

GO NAME DESCRIPTION
185 Area x – Arm Arm the Area
186 Area x – Partial arm Partial arm the Area
187 Area x – Disarm Disarm the Area
188 Area x – State disarmed Area x status
189 Area x – Entry delay Area x status
190 Area x – Exit delay Area x status
191 Area x – State armed Area x status
192 Area x – State partial armed Area x status
193 Area x – Fire alarm Area x status
194 Area x – Siren ON Area x status
195 Area x – Panic alarm Area x status
196 Area x – Intrusion alarm Area x status

Benutzerhandbuch & ETS-Datenbank

Version : 2.00

Release date : 19-FEB-2018

Applicable only to products delivered after the release date

Version : 3.00

Release date : 15-SEP-2021

Applicable only to products delivered after the release date

JA-KNX-small
SERIAL-pcb-medium

WO ES KAUFEN GIBT?

DIESES PRODUKT IST IN UNSEREM WEBSHOP ERHÄHLTLICH

 Kundenbewertung

Very easy !

Rated 5 out of 5
August 30, 2022

It is very easy to use and configure, really very very easy!!!

Óscar Toro, Owner - Ecomotics

Easy to program and install

Rated 5 out of 5
August 30, 2022

All products are easy in Programming and installation

IOANNIS MASTROKALOS, ELECTRICAL ENGINEER - ELEKTROMELETI AUDIO DESIGN

Rating

Rated 4 out of 5
März 4, 2022
Iker Fernandez, Donostua - Domotek integrador de sistemas s.l.

Sehr gutes Produkt.

Rated 5 out of 5
Februar 22, 2022

Sehr gutes Produkt.

Christian Mannersdorfer, Inhaber- Alarmanlagen Christian Mannersdorfer

The best way to integrate the Jablotron alarm system on KNX home automation.

Rated 5 out of 5
Februar 22, 2022

The best way to integrate the Jablotron alarm system on KNX home automation. Very very easy to use!!! My customers are happy because they can check in real time the state of windows and door from screens, smartphones or leds from push sensors, and the house reacts to the states of the alarm system.

Óscar Toro, Owner - Ecomotics

 Gib uns dein Feedback !